Free Ford VIN Lookup and Decoder
Find great places to stay, eat, shop, or visit from local experts.
2fafp73v08x1***** VIN lookup for 2008 FORD CROWN VICTORIA (2fafp73v08x137335)
2fafp73v08x137335 VIN is assigned
to 2008 FORD CROWN VICTORIA .
It is a PASSENGER CAR .
It was manufactured by FORD MOTOR COMPANY OF CANADA, LTD..
This 2008 CROWN VICTORIA is a
Sedan/Saloon.
2fafp73v08x111995
2fafp73v08x133236
| Vehicle Descriptor | 2FAFP73V*8X |
| Make | FORD |
| Manufacturer Name | FORD MOTOR COMPANY OF CANADA, LTD. |
| Model | Crown Victoria |
| Model Year | 2008 |
| Plant City | TALBOTVILLE |
| Trim | Base |
| Vehicle Type | PASSENGER CAR |
| Plant Country | CANADA |
| Plant Company Name | St. Thomas |
| Plant State | ONTARIO |
| body Image Id | 13 |
| Body Class | Sedan/Saloon |
| Doors | 4 |
| Gross Vehicle Weight Rating From | Class 1: 6,000 lb or less (2,722 kg or less) |
| Gross Vehicle Weight Rating To | Class 1: 6,000 lb or less (2,722 kg or less) |
| Bed Type | Not Applicable |
| Cab Type | Not Applicable |
| Trailer Type Connection | Not Applicable |
| Trailer Body Type | Not Applicable |
| Engine Numberof Cylinders | 8 |
| Displacement(CC) | 4600.0 |
| Displacement(CI) | 280.70922283576 |
| Displacement(L) | 4.6 |
| Fuel Type- Primary | Flexible Fuel Vehicle (FFV) |
| Valve Train Design | Single Overhead Cam (SOHC) |
| Engine Configuration | V-Shaped |
| Engine Brake(hp) From | 224 |
| Engine Brake(hp) To | 239 |
| Seat Belt Type | Manual |
| Front Air Bag Locations | 1st Row (Driver and Passenger) |
| Tire Pressure Monitoring System( T P M S) Type | Direct |
| NCSA Body Type | 4-door sedan, hardtop |
| NCSA Make | Ford |
| NCSA Model | Crown Victoria (For 2011 on, code as vehicle model 398) |
| Bus Floor Configuration Type | Not Applicable |
| Bus Type | Not Applicable |
| Custom Motorcycle Type | Not Applicable |
| Motorcycle Suspension Type | Not Applicable |
| Motorcycle Chassis Type | Not Applicable |
Driver Complaints
Recalls
June 26 , 2007 NHTSA Campaign Number: 07V270000
SUSPENSION:FRONT:HUB
IF A HUB FRACTURES, IT MAY POTENTIALLY DETACH FROM THE WHEEL KNUCKLE, RESULTING IN THE WHEEL BEING RETAINED ONLY BY THE BRAKE CALIPER ASSEMBLY. AS A RESULT, THE WHEEL MAY SEPARATE FROM THE VEHICLE POTENTIALLY RESULTING IN A CRASH.
Manufacturer: FORD MOTOR COMPANY
Components: SUSPENSION
Potential Number of Units Affected: 8,800
Description:
ON CERTAIN PASSENGER VEHICLES, A FRONT WHEEL BEARING AND HUB ASSEMBLY MAY FRACTURE DUE TO IMPROPER HEAT TREATMENT.
Remedy:
DEALERS WILL INSPECT BOTH FRONT WHEEL BEARING AND HUB ASSEMBLIES AND REPLACE THEM FREE OF CHARGE. THE RECALL BEGAN ON JUNE 22, 2007. OWNERS MAY CONTACT FORD AT 1-800-392-3673.
Notes:
FORD RECALL NO. 07S54.CUSTOMERS MAY CONTACT THE NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION'S VEHICLE SAFETY HOTLINE AT 1-888-327-4236 (TTY: 1-800-424-9153); OR GO TO HTTP://WWW.SAFERCAR.GOV.
August 29 , 2013 NHTSA Campaign Number: 13V385000
STEERING
If the lower bearing separates, the vehicle may experience a loss of steering, increasing the risk of a crash.
Manufacturer: Ford Motor Company
Components: STEERING
Potential Number of Units Affected: 355,000
Description:
Ford is recalling certain model year 2005-2011 Ford Crown Victoria (including Crown Victoria Police Interceptors), Mercury Grand Marquis, and Lincoln Town Car vehicles. The affected vehicles are currently registered or were originally sold in Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, and Wisconsin. Severe corrosion can seize the lower intermediate shaft which may cause the upper intermediate shaft to collapse and the steering column lower bearing to separate.
Remedy:
Ford will notify owners and dealers will replace the lower intermediate shaft, free of charge. The upper intermediate shaft and steering column lower bearing will be inspected to identify any damage that may have occurred as a result of lower intermediate shaft corrosion, and repaired or replaced as necessary. If the steering column lower bearing has separated, a retainer clip will be installed. The recall began on October 23, 2013. Owners may contact Ford at 1-866-436-7332. Ford's recall number is 13S08.
Notes:
A separate service campaign applies to vehicles in non-corrosion states not addressed by this safety recall. Owners of these vehicles should contact Ford directly about these vehicles.For the safety recall, owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
November 05 , 2014 NHTSA Campaign Number: 14V704000
STEERING:RACK AND PINION:PINION SHAFT
Improper servicing of the upper intermediate shaft could cause the shaft to separate, which can then result in a loss of steering control, and increasing the risk of a crash.
Manufacturer: Ford Motor Company
Components: STEERING
Potential Number of Units Affected: 36,888
Description:
Ford Motor Company (Ford) is recalling certain model year 2005-2011 Ford Crown Victoria, 2005-2011 Mercury Grand Marquis vehicles manufactured March 23, 2004, to August 30, 2011, and 2005-2011 Lincoln Town Car vehicles manufactured March 8, 2004, to August 30, 2011, and on which the upper intermediate shaft was serviced during the course of safety recall 13V-385. The prior repairs may not have been correctly performed.
Remedy:
Ford will notify the owners of vehicles whose repair records reflect that the upper intermediate steering shaft was repaired during the course of the prior recall 13V-385. Dealers will inspect and replace the upper immediate shaft if necessary free of charge. The recall began November 17, 2014. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 14S25.
Notes:
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.